HNLANGBO Sand Making & Washing equipment in a processing setting
HNLANGBO / EQUIPMENT SYSTEMS

Sand Making & Washing

Shape manufactured sand, wash contaminants and recover usable fines.

Request a recommendation
HOW TO SELECT

Build the sand circuit around grading and water

Fine crushing prepares material for VSI shaping where required. Wheel or spiral washers address different material and washing duties, while a fines recovery system can return usable fine particles from the wash-water circuit. The configuration depends on feed grading, cleanliness targets and water availability.

PRODUCT RANGE

Explore sand making & washing

7 equipment types
HNLANGBO VSI Sand Making Machine equipmentManufactured-sand shapingVSI Sand Making MachineFine shaping for manufactured sandView equipment HNLANGBO 5X VSI Sand Making Machine equipment5X vertical-shaft impact shaping5X VSI Sand Making MachineManufactured-sand shaping for confirmed feed dutiesView equipment HNLANGBO PXJ Fine Crusher equipmentPrepared-feed fine crushingPXJ Fine CrusherFine reduction of suitable lower-abrasion feedView equipment HNLANGBO Compound Sand Making Machine equipmentVertical fine reductionCompound Sand Making MachineVertical-shaft fine crushing and sand makingView equipment HNLANGBO Wheel Sand Washer equipmentWheel-based sand washingWheel Sand WasherWash sand with a rotating bucket wheelView equipment HNLANGBO Spiral Sand Washer equipmentSpiral washing and classifyingSpiral Sand WasherWash and grade sand in an inclined troughView equipment HNLANGBO Fine Sand Recovery System equipmentRecover usable fine sandFine Sand Recovery SystemRecover fine particles from wash waterView equipment
SELECTION INPUTS

What to share for this equipment

These details help us review the full process rather than a machine in isolation.

  • Feed rock, pre-crushed size and target sand grading
  • Clay or fines content and required cleanliness
  • Water supply, drainage and fines recovery needs
COMMON QUESTIONS

Sand Making & Washing FAQs

Do all sand plants need washing?

No. Washing depends on feed contamination, product specification and available water. Dry shaping may be suitable for some duties.

How do I choose between a wheel and spiral washer?

The choice depends on material grading, contamination, throughput and plant layout. Share a sample analysis and product target for review.

Why add a fines recovery system?

It can recover a portion of usable fine sand from wash water and help manage the fines balance. Suitability depends on the actual slurry and process.

Can you review washing and fines recovery as one circuit?

Yes. Share feed grading, water availability and target sand specification so the water and solids route can be assessed together.

RELATED READING

See the process in context

Review complete plant applications or compare all equipment systems before you request a configuration.

Manufactured sand solutions All equipment systems
DISCUSS YOUR PROJECT

Request a sand making & washing recommendation

Share feed material, sand grading target, water availability and whether washing or fines recovery is needed. We will review a suitable configuration with you. Quotations and payment are handled offline.

sales@langbomachine.com+86 155 1713 3739
To help us recommend the right equipment
  • Material and maximum feed size
  • Target capacity and output sizes
  • Project country and delivery scope

Mining Project Enquiry

Mining Project Enquiry